Functions:
1. Bluetooth pairing button: Bluetooth can be found automatically and be connected
seconds.
Start to Bluetooth pairing if press this button, then press again to play after connected, and
cancel pairing if press this button two or three seconds. LED indicates the status: litting said
CONTOUR: A three-stage multi-band compressor. It can dynamically adjust the level of each
frequency band in accordance with the input volume of sound. When the level is low, it can
enhance the high and low frequencies. And the Level is high, it also can reduce the amount of
high level. Therefore, it is able to provide the most appropriate and powerful sound sense of
hearing in accordance with the audience. For example, when listening to dance music, it will be
SPEECH: Use this setting when the speaker is being used for Speech only or Spoken Word
applications and facing towards the audience.
EXT LF: Use this setting when the speaker is being used in conjunction with a separate
subwoofer. This preset enables a High Pass Filter(HPF) set at 100Hz.
3. Power indicator
4. Signal indicator: The LED lights up when signal input.
music. Using the system with this on all or much of the time will result in poor sound quality and
damage the speakers and electronics.
6. Volume control for INPUT1: Control the volume for INPUT1 when using the INPUT1.
7. Volume control for INPUT2: Control the volume for INPUT2 when using the INPUT2.
8. MIC/LINE Switch: Use the MIC position (depressed) when a microphone is connected. Use the LINE position
(disengaged) when a line level source such as an audio mixing console, audio playback device, or electronic
musical instrument is connected.
9. MIC/LINE Switch: Use the MIC position (depressed) when a microphone is connected. Use the LINE position
(disengaged) when a line level source such as an audio mixing console, audio playback device, or electronic
musical instrument is connected.
10. MIC/LINE input for INPUT1: Use combination XLR or 1/4” Jack connector balanced or unbalanced.
11. MIC/LINE input for INPUT2: Use combination XLR or 1/4” Jack connector balanced or unbalanced.
12. MIX/INPUT2 output switch: MIX(depressed) is for INPUT1 and INPUT2 output. IN2(disengaged) is for
INPUT2.
13. MIX/INPUT2 output: Use XLR connector balanced or unbalanced.
14. Power Supply Switch
15. Power Supply Input Connector: Use with power cord.
Make sure ALL of your equipment is completely OFF and lower ALL VOLUME, LEVEL & GAIN controls before
connecting the speaker.
Connections:
1. For this unit you can connect a mixer,microphone or CD pLayer directly into your speaker. To connect a
microphone use combination XLR or ¼” jack connector to connect to the IN1(10) and IN2 (11) input.
3. Turn on your mixer/microphones or other signal source, then turn on your unit, the Power Indicator (3) will
be lit. Now you can adjust your volume controls to a reasonable level.
13
8
6
9
7
10
11
12
15
14
1
2
3
4
5
