Rev no.01/ page 12of 128
2-4 PERIODIC MAINTENANCE AND ADJUSTMENTS PROCEDURE
SPARK PLUG
Neglecting the spark plug maintenance eventually leads to difficult
starting and poor performance. If the spark plug is used for a long
time, the electrode gradually burns away and carbon builds up
along the inside part. In accordance with the periodic table, the plug
should be removed for inspection, cleaning and to reset the gap.
Carbon deposits on the spark plug will prevent good sparking and cause
misfiring. Clean the carbon deposits periodically.
CARBON DEPOSIT
Check to see the carbon deposit on the Spark Plug. If the carbon is
deposited, remove it with a spark plug cleaner machine or carefully
using a tool with a pointed end.
Check to see the worn out or burnt condition of the electrodes. If it
is extremely worn or burnt, replace the plug and also replace the
plug if it has a broken insulator, damaged thread etc.
Thickness gauge
Spark plug gap 0.6~0.7 mm (0.024-0.028 inch)
Check the spark plug for burnt condition. If abnormal replace the
Tighten the spark plug to the specified torque.
Spark Plug
Tightening torque: 15-18 N.m
NOTE
:
To check the spark plug, first make sure that the fuel
used is unleaded gasoline.
Confirm the Specification thread send and reach while
replacing the spark plug.
Summary of Contents for zipr3i
