Description of control elements
Display:
The display informs you about the operating status of the pump. The display goes into
a sleep mode after 3 minutes for maximum life and lowest power consumption.
Pressing a button turns the display on again. The overview changes every 2 seconds
as follows and displays the operating data such as energy use, mode of operation,
speed setting etc.
Die Anzeige der ersten Zeile ändert sich von „Stopped“ zu „Running“, wenn Sie die
Drehzahl erhöhen und die Pumpe einschalten:
LED:
The LED indicates a correct function via a flashing signal.
Keyboard:
The keyboard allows direct operation and in the menu the programming of the pump.
In the operating mode "Permanent" (delivery state) you can start or stop the motor
with the "Start / Stop" button and change the speed with the "up" and "down" buttons.
If you want to store the new speed permanently, press the "M" key and the last value
set will be retained. The "Start / Stop" setting is automatically saved, so that the pump
automatically returns to its original operating mode after a loss of operating voltage. If
you want to enter the menu to display operating data or to program the pump, press
the "M" key.
You get to the menu and the current operating mode is displayed. Press the "up" and
"down" keys to navigate in the menu. The current software status, operating hours and
operating mode are displayed consecutively.
The contrast of the display can be adjusted in the corresponding overview by holding
down the "Start / Stop" button and pressing the "up" or "down" buttons.
If you would like to change the operating mode, press the "Start / Stop" key when the
operating mode is displayed. You can now set the operating mode with the "up" and
"down" keys. The different operating modes are:
- Permanent: The pump runs permanently at a fixed speed.
- Wave: The pump changes in adjustable times between two fixed speeds.
- Random: The pump changes the speed within an adjustable time within a set
minimum and maximum value
- Random 2: Same as Random mode, but also the time between changes is chosen
randomly.
13
