Initial Setup
SECTION 3
4
When liquid stops dripping out of the two front nozzles, press the “C” button
11.
again, to cancel the purging process.
Buffing Solution Bottles:
The bottles of Buffing
Solution that have been shipped with your VMI Hybrid
machine are pre-filled with enough solution to last
250 minutes, 500 minutes in total. These bottles have
been sealed to ensure that no solution will escape
during shipping.
NOTE: BEFORE INSTALLATION IT IS
ESSENTIAL TO SHAKE THE BUFFING SOLUTION BOTTLE
WELL!
Once mixed, remove the safety seal from the
bottle by unscrewing the bottle cap. Once the safety
seal has been removed, reinstall the bottle cap,
and then proceed to feed the designated Buffing
Solution tubing through the cap.
NOTE: ONLY ONE OF
THE TWO BOTTLES OF BUFFING SOLUTION CONTAINS
A CAP WITH AN OPENING FOR THE TUBING. THIS CAP
MUST BE SAVED FOR REUSE! CAUTION: MAKE SURE THE
TUBING REACHES THE BOTTOM OF THE BOTTLE AND
MAKE SURE NOT TO PINCH THE TUBING!
REMINDER: PLEASE KEEP THE SHIPPING CAP & SAFETY
SEAL! SHOULD THE MACHINE NEED TO COME IN FOR
SERVICING, THE BUFFING SOLUTION BOTTLE MUST
BE REMOVED. TO ENSURE THAT THE COMPOUND
DOES NOT CURE, YOU WILL NEED TO MAKE SURE
THAT THE BOTTLE IS SEALED AND CAPPED.
Water Bottle:
The bottle for Water that has been shipped
within your VMI Hybrid machine must be filled with
any potable water. This bottle is rated for 250mL or
8oz of water. Please fill as shown in the corresponding
picture. Once filled, proceed to feed the designated
Water tubing through the cap.
CAUTION: MAKE SURE
THE TUBING REACHES THE BOTTOM OF THE BOTTLE
AND MAKE SURE NOT TO PINCH THE TUBING!
Consumable Counter Chip (C-H Chip):
The VMI
Hybrid unit comes with a Consumable Counter
Chip which is good for 500 minutes of machine use.
This chip must be installed in the back of the unit,
between the Buffing Solution and the Water bottles,
in order to operate the unit. The amount of usage on
this chip will be displayed on the front User Keypad.
The “Supplies - Fuel Gauge” located on the front User
Keypad will decrease the amount of supplies left on the C-H Chip as you continue
