SECTION 1
Unpacking
1
UNPACKING:
Open the Shipping Box.
1.
Remove the Support Documents, Power
2.
Cord, and the Consumable package
(included inside: 6 Sets of Buffing Pads, 6
Center Hubs, 2 Bottles of Buffing Solutions,
2 Jet Nozzle Plugs, and 1 C-H Chip).
Remove the Top Cardboard Inserts.
3.
Remove the VMI Hybrid from the Shipping
4.
Box.
Remove the Left and the Right Side Packing
5.
Foams.
Take the VMI Hybrid out of the plastic bag.
6.
Insert the power cord into the power inlet
7.
on the back of the machine. Then proceed
to take the other end of the power cord and
plug it into a wall outlet.
On the back side of the machine, turn the
8.
ON/OFF switch to the ON position.
The machine will power ON and the Top
9.
Cover will automatically open.
Proceed to the “Initial Setup” section of the
10.
User Manual.
SAVE ALL PACKING MATERIALS. FAILURE TO USE PACKAGING DESIGNED FOR
THIS UNIT WILL CAUSE DAMAGE TO THE UNIT AND WILL VOID WARRANTY.
Parts that need to be saved are as follows:
VMI Hybrid Shipping Box | Top Cardboard Inserts | Left & Right Side Packing
Foams | Protective Plastic Bag | Locking Cap for Buffing Solution Bottle
There is a charge plus shipping for packing materials, if they are discarded.
