INSTALLATION GUIDE
14
INSTALL REVISION DOOR
REVISION™ Door for National 157/167 - 158/168
First, install new replacement
Lock Bar Latches (VE4350LB)
open end
up with
Phillips screws (VE5318A)
as shown.
Then, using a 5/32” hex key,
Mount Nut Plate (VE4310P)
and
Bottom Hinge (VE3855)
to door with
Hex Screws (VE6836)
as
shown. Use detail as a guide for proper mounting position.
Then, align (2)
Flat Washers (VE1015506)
over the hole on the bottom of the bracket. Then, insert the
Bottom Hinge (VE3855)
into
the bottom bracket hole.
1
2
3
SECTION 1. INSTALL DOOR MOUNTING
NOTE:
Latches are adjustable to ensure proper clos-
ing and locking of the door. Multiple attempts
may be necessary to determine the exact
adjustment.
The top hinge is fix mounted to the cabinet.
Original Equipment Manufacturer (OEM)
hinge is used and no installation is required.
Detail of Hinge Mount
Top View
Bottom View
Open to 90º
Open to 90º
(Continued next page)
REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSING
INS
TALL BUCKET
DROP SENSOR
ADJUS
T DOOR
Lock Bar Latch
Screws
Bottom Hinge
Bottom Hinge
Bottom of
Door
Mount
Nut
Plate
Screws
Mount to this
hole inside
door
Mount Nut Plate
Bottom Hinge
Screws
Bottom of Cabinet
Align Washers
