background image

 
 

 

 

S-13 

 

 

SECTION VII:  CONSUMER SAFETY WARNING

 

 

WARNING: 

VENDOR CAN BE OVERTURNED IF SUFFICIENT FORCE IS 
APPLIED, AND MAY RESULT IN SERIOUS INJURY OR DEATH.

 

 

GENERAL

 

There have been incidents, including fatalities, when vending machines have been 
vandalized by being pulled over in an attempt to obtain free product or money.

 

 

To warn of the danger involved in tipping, shaking, or rocking the vending machine, a 
decal has been designed to be affixed to vending machines.  (One such decal is supplied 
with the vending machine.)  Vendo will supply sufficient decals to be placed on all 
machines, on request.  If you have any questions, contact the Technical Services 
Department of the Vendo office in your area. 

 

THE FOLLOWING DECAL SHOULD BE PLACED IN A POSITION ON 
THE VENDOR CONTROL PANEL AT EYE LEVEL.

 

 

 

 

Never rock or tilt.
Machine can fall over
and cause serious
injury or death.

Vending machine will
not dispense free
product.

389611A

WARNING

ENGLISH

 

SPANISH

AVISO

389611-2A

provee producto gratis.

Esta Vendomatica no

graves o matarle.

y cauzarle heridas

Puede caer sobre usted

esta maquina.

Nunca voltie o incline

 

MISE EN

389611-1A

distribue pas de

Cette machine ne

des blessures graves

se renverser et causer

Le distributeur peut

ou incliner.

Ne jamais secouer

GARDE

ou la morte.

produits gratuitement.

FRENCH

 

Summary of Contents for V-max

















Reviews: