VEMCO – VR4-UWM Manual
50
10.
Verify that the map listed in the receiver information is the new map.
11.
Close the communication connection with the VR4-UWM by clicking the red box with the white “X”
(Close View) on the left side of the receiver ribbon.
6.3
Set Local options
The local options feature (icon shown at right) allows you to change which suppressed pop-up queries
are visible. This feature is only enabled on the ribbon if there are queries that have been suppressed.
To enable a query, select “Always Ask” and that query will be enabled the next time that feature is
used. For example, if “Confirm before closing VR4” is selected, then a query will open the next time
a VR4-UWM is closed.
Changing an action is also possible in the Control Setting window,
without enabling the query. For example, if “No” was selected
when the “Import offloaded files into database” was disabled and
you now want to import the data without being queried each time,
then click the drop-down menu next to the answer and select “Yes”
from the list.
Be sure to select “OK” to apply the changes.