Vemco HR2, User Manual

Page: 45 / 212

3.2 Live Detections Tab
The
Live Detections Tab
displays information about incoming detections, in real time.
HR
detections
are shown in blue and PPM detection are shown in red . The following information is displayed:
l
Date and Time of the detection. By default, detections are displayed in UTC
1
time.
l
Which
Quality level
of detections to display (see "Live Tiles and Live Detection Filter Options",
on page 38 ).
l
The full ID of the detected transmitter (ex: H170-1802-39921)
l
The signal strength (S) of the received detection
l
The
ambient noise level (N)
at the time of the detection
l
The Quality Score (Q) of the received detection. Quality Score is a measure of the quality of an
HR detection, where
10
is excellent and
1
is poor . The quality score may be used to assist with
filtering out false detections.
l
The Sensor values as ADC units (D) where "D" indicates data. These values appear only for
sensor tags
.
Figure 3-2: Live Tab and active Live Detection Monitor
1
Coordinated Universal Time is the primary time standard by which the world regulates clocks and time. Time zones around the
world are expressed using positive or negative offsets from UTC, as in the list of time zones by UTC offset.
36
HR2 Receiver User Guide