Vemco HR2, User Manual

Page: 27 / 212

2.3 Connecting an HR2 Receiver to a computer
The HR2 Receiver connect to a computer using the VEMCO provided communication cable.
After removing the
Dummy Plug
used to protect the external connector, connect the supplied cable to
the HR2 receiver and to a computer, as described below.
Step 1 - Get your receiver communication cable
Take out the communication cable provided
by VEMCO.
(cable may not be exactly as shown)
Step 2 - Line up the connector and cable end
Line up the gap on the cable’s connector with the gap on the HR2’s
external cable connector.
18
HR2 Receiver User Guide