Vemco HR2, User Manual

Page: 170 / 212

7.3 Storing a receiver
When a receiver will not be deployed for an extended period of time, place the receiver in
Suspend
Mode , to stop the HR2 from recording. This will prevent the possibility of recording pings from noise
sources during storage and also saves battery life.
The desiccant pack should be left in the case during storage to reduce the occurrence of condensation in
the HR2.
Be sure to store the HR2 in a safe location where the case will not be damaged. Also be sure the
temperature of the receiver during storage does not exceed the operating temperature specified in
"HR2
Specifications", on page 183 .
IMPORTANT: It is strongly suggested that all data are offloaded and backed up prior to storage.
Following storage, the HR2 will need to be initialized to resume recording. During initialization, all
data will be erased from receiver memory.
161
7.3 Storing a receiver