Vemco HR2, User Manual

Page: 104 / 212

6.2 Exporting Data
After data has been collected and offloaded from an HR2 Receiver, VR2AR, VR2Tx, and VR4-UWM
(or VR2W), that data can be exported to be viewed and manipulated.
NOTE:
You do not need to be connected to a receiver to perform the export
operation.
To export data from an offloaded file
Step 1 - Launch Fathom
Click the
Task Bar shortcut
for the
Fathom
Launcher to start the Fathom software and click
on the Export Data icon.
Step 2 - Select files to export
To select the files to export, click
Select Files...
.
The
Select Files to Export
dialog box appears.
Navigate to the desired folder, select the file(s) to
export and click Open .
Good to know: You can filter your search
by selecting which type of file you are
looking for (VDAT, VRL, or All Supported,
see image below right).
The selected files are then shown in the
Files for
Export section of the Data Export window.
95
6.2 Exporting Data