VEMAG 168.1004, Operating Instructions Manual, Page: 101 / 167

HP10E / HP12E / HP15E / HP20E - Dairy design 6. Graphical control
6-63 © VEMAG 2013
6.8 Service
This section describes the Service page to which there is general access.
• What information is displayed?
6.8.1 Service pages
On the Service pages you will find general information about the version
of the terminal, the drive controllers and the filler.
Make a note of the current version numbers so that you can quote them
in the event of a VEMAG Customer Service query.
The operating hours which have been clocked up are shown at the
bottom of the page.
Warning!
Put a tick in the corresponding field when you carry out a service.
This sets the date for the next service. If no tick is put in the field,
the message "00850 Perform maintenance!" will appear each time
the machine is started up.
You have read-only access to all the Service pages. The Service pages
are released by the userkey.
Section 6.5.6