VEMA MODULA PLUS 2, Use And Maintenance Instruction

Page: 8 / 50

Fixed washing plant MODULA PLUS 2
Draft Vema Srl
7
0
IN
TR
ODUC
TION
The Manufacturer reserves the right to modify machine design, to carry out changes/improvements
to the machine and revisions of the handbook without notice to the Customers.
However, in case that the Manufacturer arranges with the customer to modify the installed machine,
with a resulting revision of one or more chapters of the handbook, the manufacturer shall send to
the Customer the modified chapters with the entire revised handbook.
The customer must replace the parts no longer valid with the new ones, according to the instructions
given by the Manufacturer with the updated documentation.
5 HOW TO READ THE HANDBOOK
The handbook is divided in chapters. Each chapter is dedicated to a specific class of information and
is addressed to operators with the relevant competencies.
To facilitate the comprehension, the meaning of terms, abbreviations and pictograms used in the
handbook, is provided in Paragraph 6.
FIGURE NUMBERING
Each figure is numbered in sequence, numbering is build as follows:
Example Figure 0.1.2
Figure 0 . 1 . 2
  
Chapter . Paragraph .
Sequential
number
The sequential number starts from 1 every new paragraph.
TABLE NUMBERING
Each table is numbered in sequence, numbering is build as follows:
Example Table 0-1.2
Table 0 - 1 . 2
  
Chapter . Paragraph .
Sequential
number
The sequential number starts from 1 every new paragraph.