Fixed washing plant
MODULA PLUS 2
Draft Vema Srl
37
5
USE OF THE MACHINE
1
CONTROL PANEL
2
PUTTING INTO SERVICE
After powering the machine or the line to which it is connected, carry out an accurate visual
inspection of the entire machine and ensure that there are no objects left inadvertently on it, people
or materials that might disturb the correct functioning.
Verify that all safety devices of the machine are enabled, otherwise enable them. In particular:
▪
Emergency stop devices unlocked.
▪
Correct functioning of safeguards not removed.
▪
Guard.
Data setting
Set data according to the procedures given by the manufacturer of the electrical panel and connect
it with respect to the instructions.
none
3
OPERATING MODES
REFER TO THE OPERATING MANUAL SUPPLIED WITH THE MACHINE.
The machine is not equipped with a control panel, the controls themselves are
integrated into the manufacturer's general panel.
