Fixed washing plant
MODULA PLUS 2
Draft Vema Srl
19
2
SAFETY
▪
inspection of all joints with hinges and screws;
▪
functional inspection of the machine;
▪
check of machine conditions;
▪
leak tightness test and check of the efficiency of pneumatic and hydraulic circuits;
Results of inspections must be written in a special form.
When the person responsible for inspections detects cracks or hazardous anomalies must:
▪
inform promptly the manufacturer.
▪
put the machine out of service and carry out the appropriate checks and/or repair.
▪
ensure that foreign objects are not caught in parts of the machine.
If noticed anomalies, must be removed before the next use and the expert
responsible for inspections must write down in a special form that repair is
completed, consenting in this way the use of the machine.
Check that no foreign objects are caught in moving parts after maintenance.
If worn or defective parts are not promptly replaced, the manufacturer is not responsible for damage
caused by such failure.
In order to ensure the highest degree of safety it is in any case FORBIDDEN:
▪
to tamper with any part of the Machine;
▪
to leave moving parts unsupervised;
▪
to use the machine in suboptimal conditions;
▪
to modify the machine in order to change the use originally established without the explicit
permission of the Manufacturer or without assumption of full responsibility imposed by Directive
2006/42/EC on Machinery;
▪
to move moving parts manually in case of absence of energy supply.
2
INTENDED USE
The machine is intended exclusively for use in tank cleaning operations ed.
All other uses are improper.
In an explosive (ATEX NO applicability).
Use of products/materials, different from those specified by the
manufacturer, that may cause damage to the machine and danger to the
operator and/or people nearby, is considered incorrect or improper.
