Velvet KOSMOS 400, User Manual

Page: 39 / 100

J. Menu overview
39
DISPLAY STRUCTURE
1. Kelvin By pushing once resets to White Light 3200K, pushing again resets to
5600K and by pushing a third time goes back to the last white light or
color setting.
2. Preset Press the PRESET button to display the Menu of the Presets generated
and saved by the user in the equipment. It saves both the light intensity
values, as well as colorimetry and beam angle.
3. Warning icons Inform about the global status of the fixture. When any icon is turned on
means that the function is activated (they appear as a colored icon),
otherwise the feature is disabled (they appear as a gray icon).
The warning icons are G r een/Magenta in CCT Mode or Color in HSI or
GELS mode.
4. Zoom and
Dimmer
Changes the beam angle in two ways: 1. Push the top Control Knob to
select ZOOM , then turn the knob to precisely adjust the beam angle /
2. Drag with your finger the ZOOM slider to quickly change the
beam angle. Push the top Control Knob to select DIMMER , then turn the
knob to change the intensity value.
*The rotary knobs are progressive with an acceleration curve from 0 to 100, if they are turned
slowly the parameters vary little by little, if they are turned quickly the changes are fast
5. Adjustable
parameters
The adjustable options will vary depending on the control mode
selected. To select any option you can push the bottom Control Knob
to navigate through the adjustable parameters or simply touch over
the desired parameter and adjust the numerical value using the
corresponding encoder.
3
Waring icons
1
Kelvin
2
Preset
4 Zoom and dimmer
5 Adjustable parameters
6 Output color reference
7 Control modes and settings
Top
control
knob
Bottom
control
knob
Location Studio Location Studio