7
1. Introduction
Digital multi-position magnetic stirrer with heating available in 6 and 15 position. The MULTI-HS feature exclusive feature such as timer,
safety lock, brushless motor to guarantee maximum performance and safety.
1
Aluminum alloy plate with ceramic coating
2
Main switch
3
Speed control knob
4
Temperature control knob
5
Display
The Aluminum alloy heating plate with ceramic coating (1) ensures:
• Optimum heat distribution and a high specific power thanks to the circular configuration
• Temperature homogeneity
• High resistance to thermal stress and thermal shock
• High resistance to chemical agents and surface abrasion
Magnetic stirring is generated by neodymium magnets, driven by brushless motors which offer a virtually unlimited duration.
Size and shape of the magnetic stir bar determines the stirring efficiency at any given speed.
The stirring bar code which satisfies most applications for MULTI-HS 6 is the stirring bar A00001056 (6x35 mm); for MULTI-HS 15 is the
A00001057 (6x20 mm)
NOTE:
The vessel must be made of a suitable material to withstand the foreseen temperature.
NOTE
: Using the heating plate at high temperatures may cause discoloring. This does not alter the thermal, mechanical and chemical
resistance of the plate in any way.
2. Assembly and installation
•
Unpacking
-
Check the integrity of the unit after unpacking.
•
The box includes
-
MULTI-HS 6/15 Multiposition Digital Hotplate Stirrer
-
Power supply cord
-
Instruction manual
•
First installation
-
Place the unit on non-flammable surface
-
Make sure that the values on the rating plate, correspond to those of the power supply
-
Move the main switch (2) to the OFF position
-
Ensure that the socket provided with grounding is accordant to current safety norms and easy to reach. Use only the cable
provided with the instrument.
-
Insert the mains power cable into the socket
NOTE:
the main cable must remain far away from the hot plate. It can be substituted only by main cables with same features (T=90°C,
connector C15).
A
Heating ON led
B
Temperature set point led
C
Timer led
D
Autoreverse led
E
Timer/autoreverse/lock button
EN
4
5
1
2
3
C
D
E
A
B
