WT8093
06/01/2009
6
©Velleman Components nv
®
Timer setting
•
Press the mode button
[D]
repeatedly until the timer icon
[3]
is
displayed.
•
Press and hold the set button
[E]
for ±2s, the minutes start flashing.
Modify using the up
[F]
or down
[G]
button (max. 199).
•
Press the set button
[E]
again, the seconds start flashing. Modify with
the up
[F]
or down
[G]
button.
•
Press the set button
[E]
again to save the timer setting.
•
Press the up
[F]
or down
[G]
button to start or stop the countdown.
•
When the counter reaches 00:00, the alarm sounds. To stop the alarm,
press any button
[D, E, F, G]
or touch the border
[A]
when touch
control is enabled.
Temperature mode
•
Press the mode button
[D]
repeatedly until the temperature is
displayed.
•
Press the up
[F]
or down
[G]
button to switch between °Celsius or
°Fahrenheit display.
Troubleshooting
•
Should the clock or sensor not react anymore, remove and re-insert the
batteries (see §7). When the problem remains, use a small screwdriver
to gently press the reset button
[C]
.
7. Batteries
•
Open the battery cover
[J]
at the back of the clock.
•
Insert three new type AAA (LR03C) batteries with polarity as
indicated inside the battery casing.
•
Close the battery compartment.
•
Do not attempt to recharge non-rechargeable batteries and do not
throw batteries in fire as they might explode.
WARNING: handle batteries with care, observe
warnings on battery casing. Dispose of batteries in
accordance with local regulations.
Keep batteries away from children.
