PIR1200C
- 1 -
VELLEMAN
PIR1200C -- PIR MOTION DETECTOR FOR CEILING MOUNTING
1. Introduction
The
PIR1200C
is a very sensitive and energy-saving motion detector. It is equipped with an IC and uses SMT
technology. It can distinguish between night and day (10Lux threshold). Installation of the device is very easy and it is
suited for a wide range of applications.
2. Specifications
Power Source
220-240Vac / 50-60Hz
Ambient Light
< 10lux
Operation Duration
min. 5sec. / max. 6min. ± 1min.
Detection Angle
120° (side view) / 360° (top view)
Detection Distance
6m max. (24°C)
Working Temperature
-20°C to +40°C
Working Humidity
< 93% RH
Installation Height
2m to 4m
Power Consumption
0.5W (standby 0.1W)
Rated Load
1200W (220-240Vac)
Motion Speed Detection Range
0.6 ~ 1.5m/s
3. Operation
•
Fig. 1 #1: indicator lamp: is green when the device is switched on,
turns red when there is detection.
•
Fig. 1 #2: 4-position selection switch:
- position 1: works always with activation time of ±5s.
- 2: works only at <10Lux with activation time of ±30s
- 3: works only at <10Lux with activation time of 2min ±30s
- 4: works only at <10Lux with activation time of 6min ±1min
4. Installation (see fig. 3 & 4 on p. 2)
•
Make sure there's no voltage on the power supply cables.
•
Turn the bottom plate counterclockwise and take it off the rest of the detector.
•
Mount the bottom plate on the desired location by means of the included screws.
•
Connect the wires according to the wiring diagram in fig. 3 below.
•
Put the sensor on the bottom plate and turn it clockwise.
•
Connect the device to the mains.
5. Wiring Diagram
1. brown
2. blue
3. red
4. input
5. output
6. lamp
7. sensor
Fig. 3
Fig. 1
Fig. 2
