MML4B / MML4W
1
VELLEMAN
MML4B / MML4W – PROGRAMMABLE LED BADGE
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the
MML4B / MML4W
! The programmable LED badge is a magnetic name card (with safety pin)
and display badge especially designed for commercial applications. Power consumption is low and the badge is light,
compact and easy to use.
2. Features & Specifications
•
LED: 19 x 5 DOT MATRIX
•
storage capacity: max. 118 characters
•
the display is 3 characters wide
•
messages are stored when device is switched off
•
slim design
•
fixed with magnetic strip or safety pin
•
order of the available characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789@-
/\&()$!?#*%~=+<>”.””,””,”””(SPACE) etc.
•
7 scrolling 7 brightness settings can be selected
•
rear panel buttons: start/stop, enter, page up, page down
•
power supply: 6VDC (2 x
CR2016
)
•
dimensions
•
display: 48 x 10mm
•
external: 62 x 31 x 12mm
•
weight 35g (incl. battery)
3. Installing the Battery
Open the battery compartment according to the instructions on the cover. Insert the batteries in the battery holder
with the anode facing up and push the compartment back into the housing.
4. Use
1. magnetic strip or buckle
5. battery compartment
2. ON/OFF/ENTER
3. UP
4. DOWN
Install the 2 x 3V battery (type CR2016) and the device will
switch on the screen automatically. Turn the device off by
pressing ENTER.
