MML4
1
VELLEMAN
MML4 – PROGRAMMABLE LED BADGE
1. Introduction
At the end of its life cycle, dispose of this product in accordance with local and national disposal regulations.
Thank you for buying the
MML4
! The programmable LED badge is a magnetic name card and display badge especially
designed for commercial applications. Power consumption is low and the badge is light, compact and easy to use.
2. Features & Specifications
•
LED: 21 x 7 DOT MATRIX
•
storage capacity: max.50 characters
•
the display is 3 characters wide
•
messages are stored when device is switched off
•
slim design
•
fixed with magnetic strip
•
order of the available characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789@-
/\&()$!?#*%~=+<>”.””,””,”””(SPACE) etc.
•
4 scrolling speeds can be selected
•
rear panel buttons: start/stop, speed, set, up, down, cancel
•
power supply: DC 3V (spare battery:
CR2032
or
CR2032C
)
•
dimensions
•
display: 65 x 13mm
•
external: 80 x 42 x 7mm
•
weight 33g (incl. battery)
3. Installing the Battery
Open the battery compartment according to the instructions on the cover. Insert the battery in the battery holder with
the anode facing up and push the compartment back into the housing.
4. Use
1. magnetic strip
5. SET
2. START/STOP
6. UP
3. SPEED
7. DOWN
4. battery compartment
8. CANCEL
1.
Install the 3.0V battery (type CR2032) and the device will
switch on the screen automatically.
2.
Enter the characters to be displayed:
hold the SET button for more than 3 seconds to activate the setting mode (the letter A is displayed). Select the
required character with the UP or DOWN button and press SET once to confirm the character. Repeat this
procedure for the other characters. Hold the SET button to leave the setting mode. The programmed characters
will now be displayed in sequence.
3.
Cancelling characters:
press CANCEL once to erase the last character. Hold CANCEL for 3 seconds to delete the entire message. The
device leaves the setting mode and displays the message programmed previously.
The information in this manual is subject to change without prior notice
