PEM3D
PHOTO ELECTRIC SENSOR
This manual primarily describes precautions required in installing and wiring the photo
electric sensor.
n
Specifications
Detection :
Retro reflection
Range :
3m
Power supply :
AC/DC 24V~240V
±
10%, 50/60 Hz
Consumption :
1.6 W
Operating mode :
Dark : ON
Output mode (rating) :
Relay output 1C AC 250V 2A Non-inductive
Response time :
25 msec
Hysteresis :
20% (max.)
Light source :
Infrared LED (Modulated)
LED indicators :
Operation (Red)
Sensitivity :
Built-in VR.
Material
Case :
Polycarbonate
Connection :
Flying lead. 1m Length (Ø6.5)
0.3sq x 5 Wire
Ambient light :
20.000 Lux (max.)
Operating temperature /
Humidity :
-10°C~+55°C, 85% RH (max.)
Case protection :
IP 54 (IEC)
Vibration :
10Hz ~ 55Hz 1.5mm Amplitude 2HR, 3 Directions
Dielectric Strength :
AC 1500 V 1 minute
Insulation resistance :
100M
Ω
Min. (At DC 500V, between code and case,
contact and power supply)
Dimensions :
Sensor :
60 x 60 x 36 mm
Reflector :
41 x 60 mm
Weight :
120g (max.)
n
INPUT/OUTPUT CIRCUIT AND CONNECTION
Instruction Manual
