Velbus VMB4RYLD Installation Manual Download

Page: 63 / 70

VELBUS INSTALLATION GUIDE

www.velbus.eu

HELP! WHAT HAVE I DONE WRONG?

Once everything is connected to the Velbus CAN bus cable and your
configuration PC is connected via a configuration module (VMB1USB, VMB1RS
or VMBRSUSB), you should be able to scan the bus and see all of the connected

modules appear in the configuration software “Velbuslink”

If this is not the case, there may be several reasons:

The bus cannot be scanned correctly due to an incorrect Windows
device driver

During the installation of Velbuslink, the necessary drivers should
automatically be installed in the folder

C:\Program Files\Velleman\Velbuslink\Driver

C:\Program Files (x86)\Velleman\VelbusLink\Driver

If necessary, you can manually install this driver into your Windows system. To
do so, open your Windows Start menu and do a search for

devmgmt.msc

(or

Device Manager).

Start this program and scroll down to “Ports (COM & LPT)”.

Display the contents of the “Ports (COM & LPT)” category by clicking on the

small triangle to the left. Right click on “VMB1USB Velbus USB Interface” and

select “Update driver”.

Summary of Contents for VMB4RYLD







































































Search results

Summary of Contents for VMB4RYLD

Reviews:

Related manuals for VMB4RYLD

Brands by name

Popular brands

Velbus VMB4RYLD, Installation Manual

Search results

Summary of Contents for VMB4RYLD

Reviews:

Related manuals for VMB4RYLD

Brands by name

Popular brands