veito CH1800 RE, User Manual

Page: 6 / 16

-6-
Control Panel
1-LED Display
Power, temperature and timer settings are displayed.
2-Control Button
Remote Control
1-Power
2-Setting Buttons
3-Automatic Temperature Control
4-Level Control
5-Timer Setting
Point the remote control towards the receiver whilst using it.
Remote control will not work from a distance when strong lighting or sunlight is present. In this case,
use the remote control just in front of the control panel.
When you select a function with the remote control you will hear a ‘beep’.
When the remote control is not used for a long period, please remove the battery to avoid leakage
and damage.
Do not allow water or liquid to get into the remote control.
The remote control uses a CR2025 lithium 3.0V coin battery that is commonly used in small
electronic devices.
Push the battery compartment release button and then slide out the battery tray on the bottom of
the remote control.
Remove the old battery and put the new battery in, making sure that the battery’s positive side is
facing up.Slide the battery tray back into the remote control until it clicks.