Veit SF26, Operating Instructions Manual

Page: 30 / 149

5 Transport and packaging
Although machines of VEIT GmbH are carefully checked and
packed before being delivered, damages during transport cannot
be ruled out.
5.1 Delivery
n
Incoming inspection
– Check the scope of delivery for completeness using the
delivery note.
– Check the delivery for damages (visual inspection).
n
Objections
Take the following measures if the delivery has been damages
during transport:
– Immediately contact the carrier.
– Retain the packaging (for possible examination by the car-
rier or for return shipment).
n
Packaging for return shipment
Use the original packaging and the original packaging material,
if possible.
If it is not available:
– Engage a packaging company with qualified personnel.
– Place the machine on a pallet and fasten it using a
securing device. (The pallet must be designed to carry the
weight of the machine.)
For questions on the packaging and securing device, please
contact VEIT GmbH.
NOTICE!
The machine is transported in an upright position.
– Make sure that there is no water in the steam
pipe system since this might cause damage to
the machine.
– Add a drying agent when packing the electrical
equipment.
Transport and packaging
Delivery
18.07.2017 Shirt finisher VEIT SF26 30