Veit SF26, Operating Instructions Manual

Page: 18 / 149

3.3 General safety and warning notes
WARNING!
General warning and safety information
– The machine must only be operated by trained
and instructed personnel. This means that only
persons who are familiar with the operating
instructions, the applicable safety regulations in
the workplace and accident prevention meas-
ures should use and maintain the machine.
– The mains connection cable must only be
replaced by a member of the VEIT GmbH
service team or a person commissioned and
instructed by VEIT GmbH.
– Prior to every startup, the machine must be
checked for visible damage. If there are dam-
ages, repair/maintenance measures must be
initiated immediately. Do NOT start up the
machine.
– Faults in the electrical system must only be
resolved by a qualified electrician.
– When laying the mains connection cable make
sure that it is optimally protected against
mechanical damage and that there is no risk of
tripping over.
– Only spare parts and accessories approved by
VEIT GmbH may be used.
– Unauthorised modifications to the product are
not permitted. The manufacturer cannot be
held liable for accidents/damages resulting
from unauthorised modifications.
– Do NOT start up the machine when casings/
covers are missing.
– Make sure that the cover of the fan wheel
(motor cooling) is not covered. The area
around this cover must also be kept free and
not be heated unnecessarily. Make additionally
sure that the grid of the fan cover always is
free from dust and lint in order to guarantee
adequate cooling.
WARNING!
Mains disconnecting device
The mains disconnecting device of the machine is
the connector of the mains connection cable.
Unplug the mains disconnecting device (unplug the
connector) to switch off the machine in the event of
danger.
Safety
General safety and warning notes
18.07.2017 Shirt finisher VEIT SF26 18