manualshive.com logo in svg

Veit SF26, Operating Instructions Manual

Get your Veit SF26 operating instructions manual for free download at manualshive.com. This comprehensive manual covers every aspect of operating and maintaining your Veit SF26 product. With easy-to-follow instructions and detailed illustrations, this manual will ensure optimal performance and longevity of your machine.

Share
Download
background image

3.2  Explanation of the warning symbols and danger signs

On the machine and in these operating instructions, the following

designations or symbols are used for particularly important infor-

mation:

WARNING!

Electric shocks may lead to death or serious inju-

ries.

WARNING!

Symbol indicating risk of 

hand injuries

.

WARNING!

Symbol indicating 

risk of burns

 caused by hot sur-

faces.

CAUTION!
Protection against ESD

Before touching the printed circuit board, make

sure that the person is grounded (ESD protection

or by touching a heating element/water pipe).

NOTICE!

Request to pay particular attention.

This symbol labels the connection points for the 

protective con-

ductor connection

.

Reference to external 

operating instructions

.

Safety

Explanation of the warning symbols and danger signs 

18.07.2017

Shirt finisher VEIT SF26

17

Summary of Contents for SF26






















































































































































Reviews:

No comments

Related manuals for SF26

Brands by name

Popular brands

Load more brands