Veigel BHA23-016, Installation And Operating Instructions Manual, Page: 28 / 44

5-2
Operation
Only adjust the accelerator handle when the vehicle is stationary and the
engine is switched off.
Operation
Brake:
Push the lever forwards to stop
accelerating.
Be gentle in your first few attempts
at braking; the hand control does
not require much force to make it
work.
Accelerate:
Rotate the lever downwards to
apply the accelerator.
Rotate the lever down fully to reach
the kickdown.
Adjusting the accelerator
handle:
You can adjust the accelerator
handle position to your own needs.
The adjustment range is shown in
the figure on the right.
To adjust, pull the handle back
hard, rotate it to the required
position and let it engage.
Fig. 5-1: Braking and accelerating
Fig. 5-2: Adjusting the accelerator handle
Accelerate
Brake