2 Panel Operation
22 SD780 Series Servo Technical Manual
2 Panel Operation
2.1 Basic Operation
2.1.1
Keys’ Names and Functions of the Panel Operator
The panel operator consists of display and keys.
The panel operator could display status, operate the accessory functions, set parameters and
monitoring the servo drive.
The panel operator keys’ names and functions are shown as below:
MODE
SET
DATA
Keys
Functions
MODE/SET key
Shift the function modes
Confirm parameter settings
Operate the accessory functions
▲UP key
Select parameters up or increase the value, switch between high, medium,
and low segment values in multiple segment display parameters
▼DOWN key
Select parameters down or decrease the value, switch between high,
medium, and low segment values in multiple segment display parameters
DATA/SHIFT key
Press and hold the DATA/SHIFT key for about 1 second to enter or exit
Short press to move to the left one (when flashing)
Cautions
！
Press and hold the UP and DOWN keys simultaneously to reset the servo alarm. Before resetting the
servo alarm, be sure to remove the cause of the alarm, otherwise a safety accident may occur.