E
N
VSS-002W wireless speaker system
User Manual
Important Note
•
Wireless transmission means you can use these speakers anywhere indoors without worrying about things getting in the way. (Range: Up to approx 50m*)
* Based on open field. Transmission distance varies depending on conditions of use.
•
Distance specified in the product specification is measured in a 2.4GHz friendly environment. Distance may be reduced if the building structure is made of metal
material and there are multiple 2.4GHz wireless devices operating in the same environment.
•
When using the wireless speakers in a separate room, thick or dense walls may reduce the operating range.
•
Because this system transmits signals at 2.4GHz, sound may be interrupted if interference occurs. This is due to radio frequency characteristics, and it is NOT a
malfunction.
•
Any clicking noise hear through the speaker may vary depending on the transmitter position and room conditions. It is recommended that the transmitter is placed in
a location that produces the clearest sound. Do not place the transmitter too close to TV, AC power adaptor or any other radiation sources.
•
Do not place wireless speakers in a metal cabinet or metal bookshelf.
•
Sound may be interrupted if the transmitter is used with other wireless apparatus using 2.4GHz frequency, or a microwave oven.
FCC Statement:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
•
Consult the dealer or an experienced radio/TV technician for help.
Features:
•
USB 1.1 full speed compliant stereo audio transmitter
•
Plug and play USB audio transmitter
•
Support 8 KHz, 11.025 KHz, 44.1 KHz, and 48 KHz sampling rates for 2 channels play back
•
Compatible with Win98SE/WinME/Win2000/WinXP and MacOS 9.2.1/MacOS 10.2 without additional driver
•
2.4GHz GFSK transmitter with 8 selectable channels
•
Typical 30m indoor range
•
Supports direct line in playback via 3.5mm audio jack
Accessories:
1.
USB cable
2.
3.5mm Audio cable
3.
User Manual
