January 2019
Page 15 of 35
Step 8
-
System test with screen
Before using the Connect5 system, a final diagnostic test shall be made.
By doing this,
you’ve made sure everything is in order before leaving the vehicle.
With screen:
In the Vehco application, sign in using the Service account
Username: 0000
Password: 13579
1.
From the
Start menu
, with ignition
ON
, click the
Diagnostics
button (If you
don’t find the button on the first page when clicking Start menu, swipe left).
2.
Start the test by clicking ”
Run Test
”. During the test, the “
Run Test
” will
change to “
Testing
”
The test can take up to 5 minutes
Turn
off
the ignition and verify that the vehicle icon (on the right side of the
screen) switches from green to a yellow triangle.
If test finishes with any errors, check installation and call your local Vehco
Support.
