Version 0.5
26 August 2004
Page 1 of 31
For use with Vega 50 FXS – H.323 version 04.01.05.1 T017 or greater.
© 2002-2004 VegaStream Ltd.
This document describes how to configure a Vega 50 FXS H.323 unit using the web browser
interface. The configuration described will allow the Vega to be rapidly installed and tested.
The instructions below will configure the Vega 50 FXS (connected to 8 analogue telephones) as
follows:
•
Calls made on any of the attached analogue phones will be routed to another gateway;
when sending the call over the LAN, the Vega will prefix the dialled number with a 2 digit
prefix indicating on which port the call was received.
•
Each of the 8 analogue telephones connected to the Vega will be configured with a 3-digit
extension number 406 to 413. Calls received from the LAN presenting a dialled number in
the range 406 to 413 will be routed to the appropriate telephone.
Initial configuration
Vega 50 FXS (H.323)
Standalone mode
– R5.1
LAN
Vega 50 FXS
406
p
POTS Telephones
407
413
pbx
IP network
