22
9 Supplement
VEGATOR 131 •
46836-EN-191010
9 Supplement
9.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions are valid for approved instruments (e.g. with
Ex approval). In some cases, these data can differ from the data listed herein.
All approval documents can be downloaded from our homepage.
General data
Series
Module unit for mounting on carrier rails 35 x 7.5 acc. to
EN 50022/60715
Weight
125 g (4.02 oz)
Housing material
Polycarbonate PC-FR
Connection terminals
Ʋ
Type of terminal
Screw terminal
Ʋ
Wire cross-section
0.25 mm² (AWG 23) … 2.5 mm² (AWG 12)
Voltage supply
Operating voltage
Ʋ
Nominal voltage AC
24 … 230 V AC (-15 %, +10 %), 50/60 Hz
Ʋ
Nominal voltage DC
24 … 65 V DC (-15 %, +10 %)
Max. power consumption
2 W (8 VA)
Sensor input
Quantity
1 x for connection of a conductive electrode
Input type
Active (sensor power supply by VEGATOR 131)
Measured value transmission
Alternating voltage
Response resistor
500 Ω … 200 kΩ, adjustable
Hysteresis
100 Ω … 100 kΩ
Terminal voltage (idle state)
10 Vss rectangular voltage 75 Hz
Line break monitoring
Ʋ
Detection line break
> 500 kΩ
Ʋ
Recommended resistance in the
sensor
220 kΩ
Permissible line capacitance
200 nF
Relay output
Quantity
1 x operating relay, 1 x operating/fail safe relay (optional)
Contact
Floating spdt
Contact material
AgSnO2, hard gold-plated
Switching voltage
min. 10 mV DC, max. 253 V AC/50 V DC
Switching current
min. 10 µA DC, max. 3 A AC, 1 A DC
