background image

21

9 Certificates and approvals

VEGATOR 111 • 

46105-EN-210714

9  Certificates and approvals

9.1  Approvals for Ex areas

Approved versions for use in hazardous areas are available or in 

preparation for the device series.

You can find the relevant documents on our homepage.

9.2  EU conformity

The device fulfils the legal requirements of the applicable EU direc

-

tives. By affixing the CE marking, we confirm the conformity of the 

instrument with these directives.
The EU conformity declaration can be found on our homepage.

9.3  SIL conformity (optional)

Instruments with SIL option fulfill the requirements of functional safety 

according to IEC 61508. You can find further information in the sup

-

plied Safety Manual.

9.4  Environment management system

Protection of the environment is one of our most important duties. 

That is why we have introduced an environment management system 

with the goal of continuously improving company environmental pro-

tection. The environment management system is certified according 

to DIN EN ISO 14001. Please help us fulfil this obligation by observ

-

ing the environmental instructions in chapters " 

Packaging, transport 

and storage

", " 

Disposal

" of these operating instructions. 

Summary of Contents for VEGATOR 111





























Reviews: