Vega VEGASOURCE 86, Operating Instructions Manual, Page: 27 / 56

27
6 Setup
VEGASOURCE 86 • Source holder
1008685-EN-230810
6. Fold up and tighten safety screw (4)
7. Put on the protective cap (optional), if available
Note:
The current switching status is indicated by the narrow-shaped arrow
of the stirrup. The arrow of the stirrup points in the direction of the sign
" ON ".
Radiation "ON"
The marking arrow of the stirrup points to " ON ".
Fig. 15: Radiation " ON" - VEGASOURCE 86 Version X, C
Radiation "OFF"
The marking arrow of the stirrup points to " OFF ".
Fig. 16: Radiation " OFF" - VEGASOURCE 86 Version X, C
Switching off the radiation is analogous to this procedure. To switch
off the radiation, turn the stirrup 180° anticlockwise.
If a protective cap (optional) is fitted, then the protective cap cannot
be placed on the source holder in any position.
The strap of the protective cap only shows the respective switching
position.
If the protective cap cannot be put on in a certain position, turn the
protective cap 180°.
Indication of the switch-
ing status
Switching the radiation
off
Position indication with
protective cap