28
4 Mounting
VEGAPULS 69 • Modbus and Levelmaster protocol
47252-EN-210205
Fig. 22: Cover flat, large-area profiles with deflectors
Large material heaps are best measured with several instruments,
which can be mounted on e.g. traverse cranes. For this type of ap-
plication it is advantageous to orient the sensor perpendicular to the
bulk solid surface.
The sensors do not influence each other.
Information:
Keep in mind that for these applications, the sensors are designed
for relatively slow level changes. If the sensor is used on a movable
boom, the max. measuring rate must be observed (see chapter "
Technical data
").
Fig. 23: Radar sensors on traverse crane
Instruments for a temperature range up to 200° C have a spacer
between process fitting and electronics housing. This spacer is used
to thermally decouple the electronics from the high process tempera-
tures.
Information:
The spacer may only be incorporated up to a maximum of 50 mm into
the vessel insulation. Only then is a reliable temperature decoupling
guaranteed.
Material heaps
Mounting in the vessel
insulation
