background image

4

1 For your safety

VEGAPULS 64 • 4 … 20 mA/HART - two-wire

51462-EN-160111

1.5  CE conformity

The device fulfills the legal requirements of the applicable EC guide-

lines. By affixing the CE marking, we confirm successful testing of the 

product.
You can find the CE Certificate of Conformity in the download section 

of our homepage.

1.6  NAMUR recommendations

NAMUR is the automation technology user association in the process 

industry in Germany. The published NAMUR recommendations are 

accepted as the standard in field instrumentation.
The device fulfills the requirements of the following NAMUR recom-

mendations:

• 

NE 21 – Electromagnetic compatibility of equipment

• 

NE 43 – Signal level for malfunction information from measuring 

transducers

• 

NE 53 – Compatibility of field devices and display/adjustment 

components

• 

NE 107 – Self-monitoring and diagnosis of field devices

For further information see www.namur.de.

1.7  Radio license for Europe

The instrument is approved according to EN 302372-1/2 V1.2.1 

(2011-02) for use in closed vessels.
For operation inside of closed vessels, the following conditions must 

be fulfilled:

• 

The instrument must be permanently mounted on a closed vessel 

made of metal, reinforced concrete, or comparable attenuating 

materials.

• 

Flanges, process fittings and mounting accessories must ensure 

the microwave impermeability of the vessel and not let the radar 

signal escape to the outside

• 

If necessary, existing viewing windows in the vessel must be 

coated with a microwave impermeable material (e.g. electrically 

conductive coating)

• 

Manholes and flanges on the vessel must be closed and sealed to 

avoid penetration of the radar signal

• 

The instrument should be preferably mounted on top of the vessel 

with antenna orientation downward

• 

The instrument must only be installed and maintained by appropri-

ately qualified staff

1.8  Environmental instructions

Protection of the environment is one of our most important duties. 

That is why we have introduced an environment management system 

with the goal of continuously improving company environmental pro-

tection. The environment management system is certified according 

to DIN EN ISO 14001.

Summary of Contents for VEGAPULS 64

























Reviews: