manualshive.com logo in svg

Vega VEGAPULS 63, Operating Instructions Manual, Page: 44 / 84

Share
Download
Vega VEGAPULS 63 Operating Instructions Manual Download Page 44

44

6 Set up with the display and adjustment module

VEGAPULS 67 • 4 … 20 mA/HART - four-wire

36532-EN-160224

The default setting is min. current 3.8 mA and max. current 20.5 mA.

In this menu item, the PIN is activated/deactivated permanently. 

Entering a 4-digit PIN protects the sensor data against unauthorized 

access and unintentional modifications. If the PIN is activated perma

-

nently, it can be deactivated temporarily (i.e. for approx. 60 min.) in 

any menu item.

Only the following functions are permitted with activated PIN:

• 

Select menu items and show data

• 

Read data from the sensor into the display and adjustment mod-

ule.

Caution:

With active PIN, adjustment via PACTware/DTM as well as other 

systems is also blocked.
In delivery status, the PIN is "

0000

".

This menu item enables the setting of the requested national lan-

guage.

In the delivery status, the sensor is set to the ordered national lan-

guage.

In this menu item you can define the indication of the measured value 

on the display.

Lock setup - adjustment

Display - Language

Display - Displayed value

Summary of Contents for VEGAPULS 63





















































































Reviews:

No comments