16
6 Set up with smartphone/tablet, PC/notebook via Bluetooth
VEGABAR 83 • Modbus and Levelmaster protocol
46318-EN-220624
Sensor adjustment via the display/adjustment module or PACTware/
DTM by means of VEGACONNECT is thus released again. For ac-
cess (authentication) with Bluetooth, the changed PIN is still effective.
Note:
Bluetooth access can only be established if the current sensor PIN
differs from the default setting "
0000". It is possible both when the
adjustment is unlocked and when it is locked.
6.2 Connecting
Smartphone/Tablet
Start the adjustment app and select the function "Setup". The smart-
phone/tablet searches automatically for Bluetooth-capable instru
-
ments in the area.
PC/Notebook
Start PACTware and the VEGA project assistant. Select the device
search via Bluetooth and start the search function. The device auto-
matically searches for Bluetooth-capable devices in the vicinity.
The message "
Instrument search running
" is displayed. All devices
found are listed in the operating window. The search is automatically
continued continuously.
Select in the device list the requested device. The message "
Con-
necting
" is displayed.
For the first connection, the operating device and the sensor must
authenticate each other. After successful authentication, the next con
-
nection functions without authentication.
For authentication, enter in the next menu window the 4-digit sensor
PIN.
6.3 Sensor parameter adjustment
The sensor parameterization is carried out via the adjustment app on
the smartphone/tablet or the DTM on the PC/notebook.
Preparations
Connecting
Authenticate