30
7 Setup
PLICSMOBILE • Mobile network unit PLICSMOBILE T81
55234-EN-191217
Note:
By activating remote maintenance, you agree that a VEGA employee
may access PLICSMOBILE and all connected sensors. He therefore
has full authorization to read out all parameters and measured values
and, if necessary, to save or change them. If you do not agree with
this, you must not activate remote maintenance.
With parameter protection activated, the modification of device
parameters is blocked. By entering a numerical device code (four
digits), the device is temporarily unlocked for a parameter change.
After 60 minutes without any adjustments being made, the instrument
is locked again automatically. Parameter protection is deactivated by
default.
The accompanying documents contain additional unlock codes
apart from the access codes. If one of the access codes is no longer
known, you can get access to the instrument via the respective emer-
gency unlock code and assign a new access code.
Note:
Please keep the sheet with the access and unlock codes in a safe
place.
7.4 Parameter adjustment with PC and PACTware
For adjustment via Windows PC, a Bluetooth USB adapter and the
configuration software PACTware with the suitable instrument driver
(DTM) according to FDT standard are required. The up-to-date PACT-
ware version as well as all available DTMs are compiled in a DTM
Collection. The DTMs can also be integrated in other frame applica-
tions according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
The basic operation of the software is described in the operating
instructions manual "
DTM Collection/PACTware
" attached to each
DTM Collection and which can also be downloaded from the Internet.
Detailed descriptions are available in the online help of PACTware and
the DTMs.
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simple project configuration simplifies the adjustment considerably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
In the full version there is also an extended print function for complete
project documentation as well as a save function for parameters,
Access protection, pa-
rameterization
Unlock codes
Prerequisites
Standard/Full version