Vega LM-1 / User Manual
17
Revision 05
–
“
LORAWAN SETTINGS
”
TAB
The "LoRaWAN Settings" tab allows you to configure various parameters of the LoRa
network.
Region
- allows you to select one of installed frequency plans or specify a custom
frequency plan. Custom frequency plan is EU-868 based.
Tracking device supports the next frequency plans:
Frequency plan
1
Channel
Frequency
Modulation
EU-868
1
868.1
MultiSF 125 kHz
2
868.3
MultiSF 125 kHz
3
868.5
MultiSF 125 kHz
RX2
869.525
SF12 125 kHz
RU-868
1
868.9
MultiSF 125 kHz
2
869.1
MultiSF 125 kHz
RX2
869.1
SF12 125 kHz
Custom
Set up in application
In the device frequency plan, only those channels are active by default, on which
sending requests for connection to the network (join channels). The remaining channels (that
the device should use) can be transferring by the LoRaWAN network server during the device
activation procedure (only OTAA).
If you select "Custom" in the "Region" field, you must manually specify the frequencies
that the device will use. To do this, click the "Edit" button, the channel frequency editing
window will appear:
1
By default, the device supports only two frequency plans and a custom, however it is able to order the
firmware for other frequency plans as: IN865, AS923, AU915, KR920, US915, KZ865