Vega LM-1, User Manual, Page: 11 / 29

Vega LM-1 / User Manual
11
Revision 05 – 15 April 2019
SUBMODES DESCRIPTION
Tracking device Vega LM-1 has two operating submodes – a “ Static ” and a “ Movement ”.
Switching between the submodes is carried out automatically by the built-in
accelerometer signals. The device switch from the “ Static ” submode to the “ Movement ” at the
moment when the accelerometer fixes the movement. Switching from the “ Movement ”
submode to the “ Static ” is after two minutes without moving.
For every submode the communication and data collection periods set up separately in
“Vega LoRaWAN Configurator” application (see part 4).
Also, there is an ability to set the alarm message sending when the device switch from
the “Static” submode to the “Movement” .
CONNECTING VIA USB
The tracking device can be adjusted with the "Vega LoRaWAN Configurator"
application (See part 4).
Before connecting the device to the computer for the first time, you must install the
driver for the COM port stsw-stm32102, which can be download from iotvega.com . After
running the executable file VCP_V1.4.0_Setup.exe, the installer window will appear:
USB port on the
board