Vega MT-5 CAN / User Manual
22
Revision № 04 of 01 July 2022
6 MANAGING USING SMS-COMMANDS
Some settings of the Vega MT-5 CAN GNSS tracker can be managed remotely via SMS commands.
General command format is @PIN:command, where PIN is a four numbers PIN of the device (See “Security”
part). There are also two information commands, in response to which an SMS message with information
about the device settings.
Command
Format
Example
nosleep - not switch to
the sleep mode
@PIN:nosleep
@5555:nosleep
____________
PIN-код – 5555
reboot - device reboot
@PIN:reboot
@3333:reboot
____________
PIN – 3333
tofactory - factory reset @PIN:tofactory
@1234:tofactory
____________
PIN – 1234
bboxclear – clear black
box
@PIN:bboxclear
@1234:bboxclear
____________
PIN– 1234
setout – set the output
state
@PIN:setoutY=Z
____________
Y – output number
Z – state (0 or 1)
@4321:setout2=1
____________
PIN– 4321
Output number – 2
State – 1
setextout – set the
output state of
extension unit
@PIN:setextoutY=Z
____________
Y – output number of extension unit
Z – state (0 or 1)
@4444:setextout8=0
____________
PIN- 4444
Output number of extension
unit – 8
State – 0
