Vega M200, M210, M300, M310 / User Manual
7
Revision № 03 of 05.08.2022
3 INTENDED USAGE
ACTIVATION
The activation procedure as follows:
STEP 1
Open the cover of the device and insert the micro-SIM-card in the slot. The device shall be powered
off at this step.
The side of the SIM-card with the beveled corner shall be pointed inward the slot
STEP 2
Insert the CR123 batteries into the battery compartment.
Observe the polarity. The batteries in the device are connected in parallel, i. e. they
shall be oriented in one direction
The red indicator starts flashing (double flashings every 3 seconds) - registration in the GSM network.
After registration in the GSM network, the indicator starts frequently flashing - the device is ready for
activation.
STEP 3
There are three ways to activate the device:
1.
Call the SIM-card number of the device. The device hangs up the incoming call and remembers
the phone number from which the call has been made as the owner's phone number. This method is only
possible if the device SIM-card supports voice communication.
2.
Send an SMS-message with the text 1234*35* to the SIM-card number of the device - the
device remembers the phone number from which the message has been received as the owner's phone
number.
3.
Send an SMS-message with the text 1234*35#+XXXXXXXXXXX* to the SIM-card number of the
device, where + XXXXXXXXXXX is the phone number that the device shall remember as the owner's phone
number.
