Vega M200, M210, M300, M310 / User Manual
12
Revision № 03 of 05.08.2022
WORK WITH WIRELESS RELAY
WIRELESS RELAY ADDITION
Wireless relay addition is able from owner’s phone number only
Before addition wireless relay at the device memory, you should be certain that relay power is OFF.
To add the wireless relay at the device memory you should to send the SMS-command PIN*65* to
the device phone number, after that the device activates the relay addition procedure. Indication will be as
frequent flashing and to the owner’s phone number will come message with text: “Supply power on the relay”.
The device searches around the wireless relay during 5 minutes. At that time, you should supply power 12V
on the relay: red is plus, black is minus. The message will come to the owner’s phone number: “Wireless relay
has been added”. Then the device switches to the background mode at once.
RELAY ERASING
If the relay has worked with another device then you must to erase relay before you will add that relay
at the new device. For erasing relay, you should to supply reverse polarity power 12V on the relay: plus on
black wire, minus on the red. If you do it all right then relay makes triple sound and it means that relay has
erased.
RELAY CONTROL
To delete all radio tags and relay from the device memory you should to send the SMS-command
«000» from the owner’s phone number.
Forced relay blocking is made by SMS-command «007» or «666» from the owner’s phone number. If
the relay power supply is absent then at the owner’s phone number comes the message “Command
accepted”. When the power will appear the relay executes the command and at the owner’s phone number
comes the message “Engine locked”.
Single time relay blocking OFF - «911» from the owner’s phone number.
Automatically relay blocking mode OFF until the next communication period - «999» from the owner’s
phone number.
Relay can work in two modes the one of which is setting up by function «60» (See table 1). Function
has 0 value by default and relay does not blocking automatically while there is a motion without radio tag.
If function value equal to 1 then the relay receives the blocking command in case of motion without
radio tag. Relay receives the command and breaks the circuit (for example, circuit of gasoline pump power)
