Vega M200, M210, M300, M310 / User Manual
10
Revision № 03 of 05.08.2022
WORK WITH RADIO TAGS
RADIO TAGS ADDITION
Radio tags addition is able from owner’s phone number only
The device delivered with one added radio tag. Maximum number of radio tags that may be added at
the device memory is three. For addition of radio tags at the device memory, you should make the next steps.
STEP 1
Open the device cover and press the start button. All radio tags shall be power off at this step including
radio tags added before – they will be added again.
STEP 2
Wait for indication – triple flashing and send SMS-command PIN*64* to the device phone number,
after that the device switches into radio tags addition mode. Indication will be as frequent flashing and the
message will come to the owner’s phone number: “Insert the battery in radio tag”.
STEP 3
The device searches around the radio tags during 5 minutes. At that time, you should to insert the
battery in the radio tag. The message will come to the owner’s phone number: “Radio tag No. … has been
added”, No. varied from 1 to 3 in depending on radio tag sequence number. Then the device is waiting for 1
minute the next commands and switches to the background mode.
Every time of activation the radio tags addition procedure all the previous radio
tags are deleted from the device memory and must be added again
When the radio tags addition procedure is activated the motion sensor automatically
ON
