VEF TA-103
FEATURES
FSK/DTMF dual system auto switch, FSK message auto-adjusts the time of the unit.
LCD displays incoming number, date, time and total incoming calls.
Outgoing dialed number redial back.
Local area code setting.
Fast checking the incoming call by calling number and calling date & time.
On-hook pre-dial and edit dialing number.
Calendar and real-time clock display.
Conversation time display.
P-T switch.
Anti Steal-Dialing.
Desktop/ wall mountable.
INSTALLATION
This phone requires 3 AA-sized 1.5V batteries. Open the battery compartment cover and insert the batteries in the right polarity, then
close the cover. When you find the LCD becomes very dark or some function is not correct, please change the batteries.
Plug line cord into jack at the rear of the telephone base, the other end of the line cord connects to telephone cord into handset modular
jack. Plug the other end into the jack at the left side of the telephone. Set the P/T switch as required by your telephone exchange.
Caller ID function is available only after you apply this service to the local telecom company.
SYSTEM SET UP
At on-hook state, press SET to enter the set function, LCD will display the item to set. You can press UP or DOWN to select the
different item you would like to set up. When you choose one item, press SET again to go into the setting and use UP or DOWN to
change the different setting. When finished, press SET to go into the next item setting. You can leave the set up mode at any time by
pressing DEL key.
The detailed setting steps are the following:
SETTING THE DATE
SET YEAR
Press the SET, LCD will display SET 1 DATE, press SET again to enter the setting date mode. The digit for year 2002 (represents the
YEAR) will illuminate on the LCD and 01 will flash, press UP or DOWN to edit the YEAR, then press SET to confirm and carry on the
next step-set the MONTH.
SET MONTH
The digit 1 M 1 D 00:00 (represents the MONTH, DATE, HOUR: MINUTE will illuminate on the LCD and 1 will flash, press UP or
DOWN to edit the MONTH, then press SET to confirm and carry on the next step-set the DATE.
SET DATE
The digit for 1 M 1 D 00:00 (represents the MONTH, DATE, HOUR: MINUTE) will illuminate on the LCD and 1 will flash, press UP or
DOWN to edit the DATE, then press SET to confirm and carry on the next step-set the TIME CLOCK: MINUTE. Then the LCD
automatically changes the week of that day.
SET TIME
The digit for 1 M 1 D 00:00 (represent the MONTH, DATE, HOUR: MINUTE) will illuminate on the LCD and 0 will flash, press UP or
DOWN to edit the first digit of HOUR, then press SET to confirm and carry on the next step-set the second digit of HOUR. 0 will flash,
press UP or DOWN to edit the second digit of HOUR, then press SET to confirm and carry on the next step-set the first digit of TIME:
MINUTE. 0 will flash, press UP or DOWN to edit the first digit of TIME MINUTE, then press SET to confirm and carry on the next step-
set the second digit of TIME: MINUTE. 0 will flash, press UP or DOWN to edit the second digits of TIME: MINUTE, then press SET to
confirm and carry on the next step CODE setting.
SETTING THE AREA CODE
LCD will display SET 2 CODE; press SET to enter the set mode. LCD will display CODE - - - - - and - will flash to indicate to set AREA
CODE. Press UP or DOWN to adjust the AREA CODE number and press SET to confirm. Repeat this operation to the last digit. You
only need to set 5 digits, if it is 4-digit, you need to press SET twice to exit.
SETTING LONG DISTANCE CODE
LCD will display SET 3 LCODE; press SET to enter the set mode. LCD will display LCODE - - - - - and - will flash to indicate to set
LONG DISTANCE CODE. Press UP or DOWN to adjust the LONG DISTANCE CODE number and press SET to confirm. Repeat this
operation to the last digit. You only need to set 5 digits, if it is 4-digit, you need to press SET twice to exit.
SETTING THE FLASH TIME
LCD will display SET 4 FLASH; press SET to enter, and then LCD will display FLASH 0 1000 to indicate the default flash time is 600
mili-seconds. Press UP or DOWN to select the right flash time and to press SET to confirm. There are six kinds of choices: 90ms,
120ms
，
180ms
，
300ms, 600ms and 1000ms.
SET ANTI STEAL-DIALING FUNCTION
LCD will display SET 7 ALAR, press SET to enter, and then LCD will display ALAR OFF ,press UP or DOWN key to adjust from ALAR
OFF to ALAR ON according to your requirement. Press SET to confirm.
