peripheral device (PC or Mobile Phone) in order to pair successfully. Enter the last 4 digits of the V300 serial number as
shown in the
Connection
tab.
Once paired, click the
Services
button at the bottom of the screen to check the service attributes. To upload test results via
Bluetooth and Mobile phone to a UMTS or 3G network, full data upload service will be required.
Bluetooth - Connection Established
Bluetooth - Connection Page 2
5.1.4 Power
This section provides information about current power source and information about the battery gauge. Tap on the
battery icon
, on
the top bar, to bring battery charge and estimated autonomy information.
TX300s_Platform_Manual_RevB01
Page 24 of 123
