VeEX VePAL TX300, User Manual

Page: 162 / 421

Go back to top Go back to TOC
10.1.3 Overhead Generator
SOH
Tap the Overhead Generator icon to display the OH screens shown below. There are three tabs:
SOH TX
, which allows editing of select bytes associated with the Section Overhead. Editing of J0, K1, K2, S1 is permitted
as follows:
Hexadecimal value using pop-up keypad.
Binary values using simple on-screen bit toggle or pop-up keypad.
Convenient drop-down selections. In some instances, the selections will be available over multiple pages.
Note:
While programming of most overhead bytes is possible using the OH Generator feature, dedicated functions are available
for Pointer Tasks, Payload Labels, Trace Identifier, APS Testing, TCM testing. In some instances, more advanced editing is
possible using the dedicated functions.
S1 Byte from SOH
POH TX
, which allows editing of select bytes associated with the Path Overhead.
TX300/e_e-manual_D07-00-033P_RevG00